As we all are aware that approximately 5% material is left back in the form of slag in Induction/Arc Melting Furnace Pots. Till today, the Furnace owner have been paying something from their pocket to lift Slag from their works and dispose it off. This Slag included around 15% of Steel Scrap Chips, which were extracted by breaking the Slag manually through hammers & separating the chips left wasted with Slag. In the present Scenario of Economic Competence how can one think of such handsome losses, which can be recovered easily?

SMT is pleased to introduce a semi-automatic system of crushing the Waste Steel Scrap Chips (Slag) in the form of small grains. It consists of removing dust from these grains and then separating the chips by means of magnetic chips separating machines. Finally, these chips are meshed in ball mill, which assure that not even a single chip of steel is left behind in the slag.

1. The Power / Dust extracts from this system may be sold for consumption in cement Plants & Earth Filling purposes.
2. Moreover, the dust residuals after above process, if used in earth filling, may be dug out easily even after long time.
   
3. We have also provided Safety Factor in the Machine by providing such a mechanism that the large piece beyond the crushing capacity of the machine shall be separated in the very first stage, thus avoiding any accident in subsequent stages.
4. Bucket Conveyor ensures smooth & hurdle less transfer of material from one machine to another.
   
5. The Slag dumped in Old Furnaces from last few years, can also be extracted for Metal chips through this process.
   
6. Less manpower is required than other old techniques of separating metal chips from slag.
7. Purity of metal chips is assured an accurate process.